• No Need to Upsize HP
• No Isolation Transformer
• PF Correction Not Needed
• Mounted in Door
•No Need to Open Door
•Monitor Drive Status
•View Alarms
If you have a relationship with a motor rewind shop, you have a problem, not a solution!
When replacing old DC extruder drives, the meters often have to be replaced as well. Unfortunately, meters also require regular calibration and half the time don't even work. On your next drive system, upgrade to the Remote Drive Interface (RDI) and have a drive health screen to monitor the components life cycle, view alarms, and trend the drive performance which is easily scaled to readout the FPM of your line. The RDI is truly a plug-n-play solution to the GA800 drive, giving you more than just a meter than might work!
ICT crates every ACPAK in large wooden containers to prevent any possibility of damage during shipment, so you don't have to be concerned about unexpected delays!
If you have a relationship with a motor rewind shop, you have a problem, not a solution!
•Remotely Mounted Breaker (Top, Side, or Back)
•No Power in Panel
•LED/Probe Verification
•Easier to Operate•Easier to Open and Close
•No Alignment Issues
•Fits in Old DC Space
•Can Mount Under the Barrel
•Less Power Consumption
•Better Insulation
•Better Speed Regulation
•Filter Kit Included
Up to 500HP in 24 Hours!
When transitioning from an older DC extruder drive, there is more to the decision than simply placing an AC drive in the old box! At ICT, we have pre-engineered and thermally tested a design that requires no AC and many built-in features making your installation trouble-free. We stock 100HP, 150HP, 200HP, 250HP, 300HP, 400HP and 500HP systemsfor shipments in as little as 24 hours and install about 70 per year on extruders! Combine our features, delivery with a three-year drive warranty and you will find this a solution hard to beat!
•Heavy Ga Steel Enclosure
•More Stable
•More Durable
Integrated Control Technologies (ICT) is offering a product enhancement for the Remote Drive Interface that works with the ACPAK that allows customers to start-up their AC drive package themselves with the expert assistance of ICT. The SMART-UP ASSISTANT takes you step-by-step through the start-up of your ACPAK. In addition, ICT can connect to your drive and verify the settings. THERE IS NOTHING ON THE MARKET LIKE THIS!!!
Our solution is thermally tested and installed on hundreds of extruders in the US!
Our solution is thermally tested and installed on hundreds of extruders in the US!
If you are having a difficult time justifying an upgrade to AC, ICT can help! We can provide quick estimates or even conduct full studies to help you achieve more efficient systems.
CALL US +1.9729067445
•Eliminates Iso-Transformer
•Reduces Heat Losses
•Limits Energy Losses
Up to 500HP in 24 Hours!
Not all motors are the same, and an Inverter Rated Motors is not the same as a Vector Rated Motor. Choosing the correct motor is as important as selecting the correct drive. Let ICT help you!
Thinking about taking on a DC to AC conversion? There are many pitfalls in this area where a little advice beforehand can go a long way in preventing big headaches down the road. We can help!